help! Cercasi lista modifiche registro

[MassiMax]

chi sa dirmi dove posso trovare un elenco di tutte le modifiche che se apportate al registro rendono più performante Win Mobile?

[Kira_Ryuck]

To change the softkeys on the Today screen
• The left-hand softkey settings are at 'HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112', the right-hand softkey settings are at 'HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113'
• The 'Default' string value can be changed to whatever text you wish to have displayed
• The 'Open' string value can be changed to the program you wish to run when the softkey is pressed
For example, to change the left-hand softkey to start Pocket Excel you would set
• HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112\(Default) = Pocket Excel
• HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112\Open = \windows\pxl.exe
If you want to change the left-hand softkey to start Messaging you would set
• HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112\(Default) = Messages
• HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112\Open = \Windows\tmail.lnk
If you want to change the right-hand softkey to start Contacts you would set
• HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113\(Default) = Contacts
• HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113\Open = \Windows\AppButtons\Contacts.lnk
_____
To set or remove the operator phone skin
• The setting is at 'HKEY_LOCAL_MACHINE\Security\Phone\Skin'
• The 'Enabled' DWORD value can be set to '1' to show the operator skin or '0' to show the default skin
For example, to show the default skin
• HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled = 0
_____
To hide or show the GPS connection in the system panel
• The settings are at 'HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings'
• The 'Hide' DWORD value should be set to '0' or deleted to show the panel and to '1' to hide the panel
• The 'Group' DWORD value should be set to '2' to show the panel and deleted to hide the panel
For example, to show the GPS connection in the system panel
• HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings\Hide = 0
• HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings\Group = 2
_____
To change the ability to receive files via Bluetooth (OBEX)
• The setting is at 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex'
• The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
• HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
_____
To set the data connection to remain permanently on
• The setting is at 'HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\(GPRS connection name)'
o (GRPS connection name) is the name of your connection to the outside world
• The 'AlwaysOn' DWORD value can be set to '1' to remain on permanently or '0' to turn on and off as required
For example, to set the data connection always on for a T-Mobile MDA Pro
• HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\T-Mobile Internet\AlwaysOn = 1
_____
To change the display of the screen rotation icon in the system tray
• The setting is at 'HKEY_LOCAL_MACHINE\System\GDI\ROTATION'
• The 'HideOrientationUI' DWORD value can be set to '1' to hide the icon or '0' to show the icon
For example, to hide the screen rotation icon
• HKEY_LOCAL_MACHINE\System\GDI\ROTATION\HideOrientationUI = 1
_____
MS Voice Command activation from BT headset:
Now this one is sweet and makes the JASJAR the daddy for voice commands.
• Install Voice Command to the default location.
• Fire up a registry editor
• Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
• Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
• Now, when you press your BT headset connect button, MS Voice command will fire up and take commands through the headset. It's reponses will be played through the headset too.
_____
How to Disable the Start Menu Animation
• Go to the HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu key.
• Set the "AniType" value data to 0 (Set to 6 to return to full animation).
• Soft reset.
_____
How to Enable Window Animation
• Go to the HKEY_LOCAL_MACHINE\SYSTEM\GWE key.
• Set the "Animate" value data to 1 (Set to 0 to return to no animation).
• Soft reset.
_____
Change Pocket IE to IE Version 5.5 (For Secured Sites)
• Go to the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\User Agent\ key.
• Set the default value to "Mozilla/4.0" (Default is "Mozilla/2.0").
• Set the "Version" value to "MSIE 5.5" (Default is "MSIE 3.02").
• Set the "Platform" value to "Windows NT 5.0" (Default is "Windows CE").
This will only work on some secure sites that check version number rather than perform a check for support of secured transactions.
This registry hack will make Pocket Internet Explorer identify itself as IE 5.5 on Windows 2000. However it will prevent web sites that provide Pocket PC specific content to be able to know you're actually using a Pocket PC.
_____
Universal can't connect to Windows Server 2003--
Cant map to a Windows 2003 Server share? Is it also a Domain Controller? Check the server for
• start / programs / administraton tools / Domain Controller Security Policy
• Then check Local Policies / Security Options :
• Microsoft Network Server: Digitally sign communications (always)
• change to disabled
_____
Allow the unsigned app from installing for everything.
• HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies] Change value 0000101a from 0 to 1
Do a soft reset.
_____
Change the date in the Titlebar
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell "TBOpt"=hex:\
13,00,00,00
Change 3 as follows: 0:blank 1:time only 2:date only 3:date & time
Can someone figure out how to stop date line from being bold.
Combine this with follwoing to get a date that fits:
_____
Set short date format to something other than the limited list provided under settings>regional
HKEY_LOCAL_MACHINE\nls\overrides "SSDte"="d.M "
This gives 1-10 format with a space behind so that date is not cut off by OK button
_____
Change fonts
Popup fonts:
HKEY_LOCAL_MACHINE\System\GWE\Menu\PopFnt "Ht"dword:00000384 <-change this using a decimal editor. "Wt"=dword:000002bc "HtInPts"=dword:00000001 "CS"=dword:00000000 "It"=dword:00000000 "Nm""Tahoma"
Menubar fonts:
HKEY_LOCAL_MACHINE\System\GWE\Menu\BarFnt "Ht"dword:00000384 "HtInPts"=dword:00000001 "CS"=dword:00000000 "Wt"=dword:000002bc "It"=dword:00000000 "Nm""Tahoma"
Change the Ht value. In a decimal editor the default is 900, and 700 works very nicely
_____
Change system font
HKEY_LOCAL_MACHINE\System\GDI\SYSFNT "Ht"dword:00000384 "HtInPts"=dword:00000001 "CS"=dword:00000000 "Wt"=dword:00000190 "It"=dword:00000000 "Nm""Tahoma"
As above, decimal default is 900, I find anything less actually causes some poor layout in some apps - not worth playing with too much
_____
Ringtone settings. Best to just export ur own settings and keep the .reg file. Read BA hacks for info on what the script decodes to
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0 "Sound""\\Windows\\OldPhone .wma" "SavedSound""\\Windows\\OldPhone .wma" "Category""Ring" "Script""apw3r"
_____
Glyph cache size - changes refresh speed
HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE "limit"=dword:00002000
Change to 4000 to double default
_____
Terminal services cache size - makes a HUGE difference to black blocks
Default state: HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client "Keyboard Layout"="00000409" "BitmapPersistCacheSize"=dword:00000001 "BitmapCacheSize"=dword:00000015
Set to MS recommended: HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client "BitmapPersistCacheSize"dword:0000000a "BitmapCacheSize"=dword:000005dc "Keyboard Layout""00000409"
_____
Change the Dialler Skin to a pic you want!
HKLM\Security\Phone\Skin\PROGRESS\portrait\other HKLM\Security\Phone\Skin\PROGRESS\landscape\other
HKLM\Security\Phone\Skin\DIALER\portrait\other HKLM\Security\Phone\Skin\DIALER\landscape\other
value bmpNormal \Windows\BKGND_Port.bmp value bmpNormal \Windows\Bkgnd_Land.bmp
I resized the pic to the correct size and changed the keys to BKGND_Port1.bmp, rebooted.
Simple to do, and keeps your dialler in with your today screen
_____
How can you change the home-page on your web hardware button? Simply use this key and set your favourite home-page:
HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD
_____
How long would you like the Universal keyboard to shine? 10 seconds is too short?, change the value of this key and it will shine so long as you wish! (or until the battery dies!)
HKEY_CURRENT_USER\ControlPanel\Backlight\QKeyLedTimeout
_____
How can I stop Active Sync from always turning-on even when it is not connected to my PC?
Go to menu->add server source->write down any server address (fake)->complete procedure then menu->schedule->switch to manually (at the top of the list)
_____
Remove Icons from the Taskbar
To Remove Battery:
HKLM\services\power\ShowIcon === change from 1 to 0 (zero).
To Remove Screen Rotation:
HKLM\services\screenrotate === change from 1 to 0 (zero)
To Remove the Wireless connection manager
HKEY_LOCAL_MACHINE\Services\WirelessMgr and change the DWORD Keep to 0, soft-reset
_____
To be able to edit the Messenger notifications you should add this keys:
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65E-239C-47a7-9304-0D347F580408}
"Options"=dword:00000008
Default="Messenger: Contact Online"
"Wave"="notify"
"Duration"=dword:00000000
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65F-239C-47a7-9304-0D347F580408}
"Options"=dword:00000008
Default="Messenger: New Message"
"Wave"="notify"
"Duration"=dword:00000000
After adding these you can go to the Sound and Notifications control panel and customize the notification behavior.
_____

[Kira_Ryuck]

Disable menu animations
To disable menu animations (sliding in/out) and speed up performance of the UI a bit:
HKLM\SYSTEM\GWE\Menu\AniType = 0 (DWORD decimal)
To change it back to the default:
HKLM\SYSTEM\GWE\Menu\AniType = 6 (DWORD decimal)
_____
Disable window animations
To disable window animations (minimizing/maximizing) and speed up performance of the UI a bit:
HKLM\SYSTEM\GWE\Animate = 0 (DWORD decimal)
And to switch them back on:
HKLM\SYSTEM\GWE\Animate = 1 (DWORD decimal)
_____
Increase font cache
To increase the font cache, speeding up font rendering at the cost of a bit of memory:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 (DWORD decimal)
To change it back to the default:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
You can set the value to pretty much anything you like
_____
Enable FileSystem cache
To enable the FileSystem cache, speeding up overall performance at the risk of the cache not being written on a sudden reset:
HKLM\System\StorageManager\FATFS\EnableCache = 1 (DWORD decimal)
To disable again:
HKLM\System\StorageManager\FATFS\EnableCache = 0 (DWORD decimal)
Note that by default, the cache size is zero, and you will see no effect. See "Increase FileSystem cache" to incease the cache size
_____
Increase FileSystem cache
To increase the file system cache:
HKLM\System\StorageManager\FATFS\CacheSize = 4096 (DWORD decimal)
To return the file system cache to zero:
HKLM\System\StorageManager\FATFS\CacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
_____
Increase FileSystem filter cache
To enable the file system filter cache, speeding up overall performance with file mangement:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 4096 (DWORD decimal)
To return the file system filter cache to zero:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
_____
Change the thickness of scrollbars
To change the thickness of the scrollbars at the right/bottom of documents larger than the screen, adjust...
For the horizontal (bottom) scrollbar:
HKLM\System\GWE\cyHScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxVScr = 9 (DWORD decimal)
The default thickness is 13. You can set the value to pretty much anything you like
_____
Change the length of scrollbar arrow buttons
To go with changing the thickness of the scrollbars, you may wish to change the length of the scrollbar arrow buttons...
For the horizontal (bottom) scrollbar arrows:
HKLM\System\GWE\cyVScr = 9 (DWORD decimal)
For the vertical (right) scrollbar:
HKLM\System\GWE\cxHScr = 9 (DWORD decimal)
The default length is 13. You can set the value to pretty much anything you like
_____
Enable ClearType in Landscape mode
To enable ClearType in Landscape mode:
HKLM\System\GDI\ClearTypeSettings\OffOnRotation = 0 (DWORD decimal)
To disable:
HKLM\System\GDI\ClearTypeSettings\OffOnRotation = 1 (DWORD decimal)
Note that your PocketPC screen's LCD red/green/blue ordering required for proper ClearType display is only correct for Portrait display. You may or may not prefer to leave ClearType in Landscape mode disabled
_____
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
_____
Change the 'user agent' identification of Pocket Internet Explorer
To change the 'user agent' identification of Pocket Internet Explorer, several fields need to be adjusted. The example shows how to identify as Internet Explorer 6 - desktop version
The standard compliance 'user-agent' string:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\(Default) = "Mozilla/4.0" (REG_SZ string, no quotes)
Defaults to "Mozilla/2.0" The application/version string:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\Version = "MSIE 6.0" (REG_SZ string, no quotes)
Defaults to "MSIE 4.01" The host operating system string:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\Platform = "Windows NT 5.0" (REG_SZ string, no quotes)
Defaults to "Windows CE" Please note that if you change the Platform string, PDA-friendly sites may stop sending you PDA-friendly content automatically. Leave this string set to "Windows CE" unless a site absolutely refuses to work, or you want the site to feed you its normal content.
_____
Change the location of 'Temporary Internet Files'
When browsing the web, pages and images are saved in the 'Temporary Internet Files' location. You can change this location to, for example, your Storage Card:
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache = "\Storage Card\cacheie" (REG_SZ string, no quotes)
To return to the original location:
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache = "\Windows\Profiles\guest\Temporary Internet Files" (REG_SZ string, no quotes)
_____
Change the display of the clock in the taskbar
The clock in the taskbar can be changed to show not only the time, but also the date, or just the date, or nothing at all.
To show nothing:
HKLM\Software\Microsoft\Shell\TBOpt = 0 (DWORD decimal)
To show just the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 1 (DWORD decimal)
To show just the date:
HKLM\Software\Microsoft\Shell\TBOpt = 2 (DWORD decimal)
To show both the date and the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 3 (DWORD decimal)
Note 1: If you switch to the Analog clock display, the date will remain visible -through- the Analog clock
Note 2: Setting the clock to show 'nothing' will still keep the reserved space, showing the taskbar background, and obscure any icons that will shift to the right.
Note 3: Your date may get obscured by the space reserved for the OK/Close button in the top-right. You can fix this my adding spaces at the end of your 'Short Date Format'. See also the tweak on 'Change the Short Date Format'
_____
Change the Short Date Format
Applications may call upon the system to provide a 'short date format'. One such application is the Date/Time display in the taskbar, if set to show the date. To change the Short Date Format to show "Mon/2" (example):
HKLM\nls\overrides\SSDte = "ddd/d " (REG_SZ string, no quotes)
Note 1: For more information on date/time formatting strings, see: http://msdn.microsoft.com/library/default....dateformats.asp
Note 2: All applications using the short date format will be affected by this change. Choose wisely
_____
Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM\Security\Policies\Policies\0000101a = 0 (DWORD decimal)
Note that this makes it easier for any malware to install itself
_____
Default SMS Delivery Notifications to on
To always have SMS Delivery Notifications enabled:
HKCU\Software\Microsoft\Inbox\Settings\SMSDeliveryNotify = 1 (DWORD decimal)
To disable them (can still enable per-SMS in SMS settings):
HKCU\Software\Microsoft\Inbox\Settings\SMSDeliveryNotify = 0 (DWORD decimal)
Note that SMS Delivery Notifications are a network provider option, and the recipient may refuse them to be sent out
_____
Change the application launched by Today screen Soft Keys
To change the application launched by the Today screen Left soft key:
HKCU\Software\Microsoft\Today\Keys\112\Open = "\Windows\Calendar.exe" (REG_SZ string, including quotes)
To change the title of the Left soft key:
HKCU\Software\Microsoft\Today\Keys\112\(Default) = "Calendar" (REG_SZ string, no quotes)
To change the application launched by the Today screen Right soft key:
HKCU\Software\Microsoft\Today\Keys\113\Open = "\Windows\Start Menu\Programs\Contacts.lnk" (REG_SZ string, including quotes)
To change the title of the Right soft key:
HKCU\Software\Microsoft\Today\Keys\113\(Default) = "Contacts" (REG_SZ string, no quotes)
Note that 113 normally doesn't exist by default, and probably needs to be created
Also note that there is at least 1 application that allows you to set these through a GUI, developed by FdcSoft called SoftKeyAppletEx
_____
Disable 3gp (video) size limit
To disable the 3gp (video recording format) size limit:
HKLM\SOFTWARE\HTC\camera\AppDefSettings\P3\EnableLimit = 0 (DWORD decimal)
To re-enable:
HKLM\SOFTWARE\HTC\camera\AppDefSettings\P3\EnableLimit = 1 (DWORD decimal)
_____
Add GPS settings icon
If you have a GPS device, you can add a GPS settings icon to your Start > Settings menu using:
HKLM\ControlPanel\GPS Settings\Group = 2 (DWORD decimal)
HKLM\ControlPanel\GPS Settings\redirect <-- delete, or rename, this value
Note that '2' stands for the Connections tab, '1' is System and '0' would be Personal
Note also that this has reportedly disabled one person's USB connectivity. To restore, set "GPS Program Port = None", "GPS Connection Port = None", "Automatic GPS Management = on"
_____
Add Lunar Calendar mode to Calendar
You can add a Lunar Calendar mode to the Calendar view, showing a 'Month' view with the Lunar months/days.
HKLM\Software\Microsoft\Calendar\ShowLunarCalendar = 1 (DWORD decimal)
And to disable again:
HKLM\Software\Microsoft\Calendar\ShowLunarCalendar = 0 (DWORD decimal)
_____

[Kira_Ryuck]

Change location of ringtones
You can change the location where WM5 will look for ringtones by adjusting the following key (example given is for ringtones placed on the Storage Card root folder)
HKCU\ControlPanel\Sound\Categories\Ring\Directory = "\Storage Card\" (REG_SZ string, no quotes)
The default location may be "\Windows\" or "\Windows\Rings\" depending on your Device provider
_____
Change slide-out keyboard layout
If you have a Device from one country, but would like to use the keyboard layout of another, you can change the keyboard's language setting to do so...
For US layout (QWERTY):
HKCU\ControlPanel\Keybd\Locale = 1033 (DWORD decimal)
For German layout (QWERTZ):
HKCU\ControlPanel\Keybd\Locale = 1031 (DWORD decimal)
For French layout (AZERTY):
HKCU\ControlPanel\Keybd\Locale = 1036 (DWORD decimal)
_____
Show Edge network indicator instead of GPRS
If your network provider supports the Edge network (and your device does as well), you can use the following to show a little 'E' icon instead of 'G' icon when connected to an Edge network:
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon = 1 (DWORD decimal)
To disable again:
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon = 0 (DWORD decimal)
Note that your device -and- your network operator need to support Edge, otherwise you won't see it. Also note that if you connect to GPRS, you will still see the 'G' icon.
_____
Make reminders show only once
By default, reminders will keep bugging you for 2 minutes. You can change this to zero minutes by adjusting this value:
HKCU\ControlPanel\Notifications\Reminders\AutoSnooze\AutoSnoozeMins = 0 (DWORD decimanl)
Note that you can set this to any value you like. Alternative to setting this value to zero is to delete the '?AutoSnooze' key altogether
_____
Remove operator skin from Phone app
If your device's Phone app is skinned, you can remove by setting:
HKLM\Security\Phone\Skin\Enabled = 0 (DWORD decimal)
Similarly, you can restore it with:
HKLM\Security\Phone\Skin\Enabled = 1 (DWORD decimal)
_____
En/Disable receiving of files over BlueTooth/IrDA
If you want to prevent receiving files over BlueTooth or IrDA, you can set the following value:
HKLM\Software\Microsoft\Obex\IsEnabled = 0 (DWORD decimal)
And to (re-)enable:
HKLM\Software\Microsoft\Obex\IsEnabled = 1 (DWORD decimal)
_____
GPRS always on
If you want your GPRS (or EDGE) connection to always be on, set the following:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 1 (DWORD decimal)
And to turn it off:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\|gprs connection name|\AlwaysOn = 0 (DWORD decimal)
Note that |gprs connection name| will depend on the name you've given your GPRS connection
_____
Hide/Show Screen orientation icon
If you wish to hide the Screen orientation icon, shown in the task bar on some devices, you can set:
HKLM\System\GDI\Rotation\HideOrientationUI = 1 (DWORD decimal)
And to show it again:
HKLM\System\GDI\Rotation\HideOrientationUI = 0 (DWORD decimal)
If this doesn't work, you can try:
HKLM\Services\screenrotate = 0 (DWORD decimal)
And to show it again:
HKLM\Services\screenrotate = 1 (DWORD decimal)
Note that this icon and its feature may not be available on your device at all.
_____
Hide/Show battery indicator in Task bar
If you wish to hide the battery indicator in the task bar on some devices, you can set:
HKLM\Services\Power\ShowIcon = 0 (DWORD decimal)
And to show:
HKLM\Services\Power\ShowIcon = 1 (DWORD decimal)
Note that this icon and its feature may not be available on your device at all. For example, the HTC Wizard regularly ships with a battery indicator in the Tray instead, governed by "Windows\Startup\Init_Tray.exe".
Note also that this reportedly does not work on AKU2 ROMs to remove the new battery indicator
_____
Show slide-out keyboard caps/dot icon next to SIP
If your device contains a file called "capnotify.exe", try running it (most devices that have it will already have it in the Windows\StartUp\ folder), and setting the following value to get a visual presentation of whether you are in caps or dot (alternate key function) mode:
HKCU\ControlPanel\Keybd\EnableIndicator = 1
Please note that if your device has no external keyboard with caps/dot mode, you won't gain anything from this tweak
Please also note that the application "?CapNotify.exe" must be running (normally found in \Windows\?StartUp\ already) for this to work
_____
Change ringtone/vibrate/LED flash characteristics
If you would like more control over how your device rings/vibrates/flashes its LEDs on events, you can can change the Script values of these events. For example, for an incoming call performing 'activate device, play ringtone, wait 3 seconds, repeat':
HKCU\ControlPanel\Sounds\RingTone0\Script = "apw3r" (REG_SZ string, no quotes)
For performing 'active device, set volume to 33%, play ringtone, set volume to 67%, play ringtone, set volume to 100%, play ringtone (no repeat)':
HKCU\ControlPanel\Sounds\RingTone0\Script = "ac33pc67pc100p" (REG_SZ string, no quotes)
The following are the full codes available to you. Please note that all the codes are executed simultaneously except after a ringtone play / wait code. E.g. 'v1p' will vibrate and play at the same time, while vibrating for 1 second. But 'pv1' will play the ringtone through all the way first, then start vibrating for 1 second.
a = activate device
cN = set volume to N in percentage max volume
fN = flash notification LED for N seconds
p = play ringtone. Note that this will play the ringtone all the way through before continuing with the next code.
r = repeat. Note that this should be the last code in your Script string, if used at all.
vN = vibrate for N seconds
wN = wait for N seconds. Note that the device will wait this long before continuing with the next code.
_____
Change the keyboard backlight duration
To change the duration of the keyboard backlight, you can set (example is 30 seconds):
HKCU\ControlPanel\Backlight\QKeyLedTimeout = 30 (DWORD decimal)
Please note that this may not work on some devices. One such notable exception is the HTC Wizard.
_____
Disable the SMS Sent notification
If you're tired of the "Message Sent" notification after sending an SMS/text message, you can disable them:
HKLM\Software\Microsoft\Inbox\Settings\SMSNoSentMsg = 1 (DWORD decimal)
And to re-enable:
HKLM\Software\Microsoft\Inbox\Settings\SMSNoSentMsg = 0 (DWORD decimal)
Please note that the 'Settings' key may not exist in your device, and thus may have to be created first.
_____
Change the SMS Sent notification text
If you just want the "Message Sent" notification to read something different, adjust the following:
HKLM\Software\Microsoft\Inbox\Svc\SMS\MessageSent = "Message Sent" (REG_SZ string, no quotes)
_____
Always require SMS Delivery notification
If you always want an SMS Delivery notification (see note below!), and are tired of ticking the 'Request message delivery notification' checkbox, set:
HKLM\Software\Microsoft\Inbox\Settings\SMSDeliveryNotify = 1 (DWORD decimal)
To disable again:
HKLM\Software\Microsoft\Inbox\Settings\SMSDeliveryNotify = 0 (DWORD decimal)
Note 1: Delivery notifications will depend on your and the recipient's operator network capabilities! Note 2: You can still override this with the regular checkbox.
_____
Set default SIP
The default SIP on practically every device is the Keyboard. You may prefer entry with a different SIP. If so, you can set this to be the default SIP through:
HKCU\ControlPanel\SIP\DefaultIM = |SIP ClassID|
The |SIP ClassID| will depend on the SIP's ClassID, which may vary per-device. You can find the correct ClassID by searching for "IsSIPInputMethod" in HKCR, then going to the top key and checking the name of the SIP that's in the (Default) value.
Please note that this doesn't work with all SIPs. Transcriber/Calligrapher are two examples of this.
You can, however, set Transcriber as the default SIP by starting Transcriber.exe on startup. (This should be moved to, or added to, non-registry Tweaks page)
WARNING: Do not assume that the below ClassIDs would be -as found- on your device! Setting it to a non-existant SIP may prevent your device from booting up!
The following are some of the ClassIDs typically found:
Typical pre-installed:
{42429667-ae04-11d0-a4f8-00aa00a749b9} = Keyboard
{51A2CB38-154E-4C92-A625-A83871C99EC2} = Phone Pad
{42429690-ae04-11d0-a4f8-00aa00a749b9} = Letter Recognizer
{42429691-ae04-11d0-a4f8-00aa00a749b9} = Block Recognizer

Third Party:
{991A1001-9DCB-11d3-B3C2-000000000000} = AccessPanel
{1E03E205-12D7-4d82-963E-C01889F2EC10} = Claviature
{95BDB641-772F-11d2-AC6B-204C4F4F5020} = Fitaly
{52429695-AE04-11D0-A4F8-00AA00A749B9} = FleXslide
{4EAD10BD-83AC-44b9-99AE-71958C1B0F0E} = InPad
{C099F78A-924E-4814-A8CF-54E7BD8C2124} = JetKeys
{4128DEE4-EE84-4338-A261-CC704CB32C19} = NanoPad
{42429695-AE04-11D0-A4F8-00AA00A749B9} = NullKB
{025ECAC2-075B-4b82-A972-05E4C17719EA} = PDAMedia Excel
{FA957346-A925-4b68-B9E1-D3D0310F4433} = PDAMEdia KBD
{DE6510EF-6691-401D-B1D3-B9074BFD1555} = PHM Character Map
{81FC2CAD-AD71-4793-9464-36D27630E584} = PHM Clipboard Pane
{9DD23292-0AB3-48F2-A245-0713652A8CEE} = PHM Ext. Keyboard
{FFFD6819-FF21-4e93-B844-A1BBF986B55C} = QuikWriting
{991A1000-9DCB-11d3-B3C2-000000000000} = RapidCalc
{A070BE16-AD56-11d3-BC77-00C06C512035} = Resco Keyboard Pro
{7F0854D9-9ADA-45A9-A3A2-189D9BE8A653} = Smilies Input Panel
{26F56EF0-2CE8-4C46-ADC8-FE0A7DF12DD1} = SPB Fullscreen Keyboard
{5efab5bd-0af5-48f8-abec-6f36e3a0b5af} = TenGo
{8A7968F3-677B-4F64-859C-8A49FCCCB9BF} = TextPlus
{A5304BFA-CC1D-493f-87D3-D9C17147FA32} = TopKey
{4345EA53-B8A5-4E24-A14A-F7C34DD78077} = WordLogic
_____

[Kira_Ryuck]

Put custom text on bottom-right of Today screen
You can set some piece of text on the bottom-right of the Today Screen by setting the following key:
HKLM\Software\Microsoft\Shell\DeviceBeta\Today = "Hello World" (REG_SZ string, no quotes)
Please note that this text won't take up Today item text. It will be obscured by Today items.
_____
Navigate PIE up/down with the four-way pad
By default, PIE uses the four-way pad's up/down buttons to jump between hyperlinks and form fields. You can set it up to page up/down instead by setting:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 0 (DWORD decimal)
And to re-enable hyperlink/form field navigation:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1 (DWORD decimal)
Note that you may still jump between links using Tab and Shift-Tab if your Device has a built-in hardware keyboard.
_____
Navigate PIE up/down with any key
You can change the keys used by IE for page up/page down browsing by creating keys linked to these controls:
Page Up:
HKLM\Software\Microsoft\Internet Explorer\KeyMaps\|key code| = 1 (DWORD decimal)
Page Down
HKLM\Software\Microsoft\Internet Explorer\KeyMaps\|key code| = 2 (DWORD decimal)
Where |key code| is the code of the key pressed. For example, if your Device has a phone pad on the front, you may prefer to use the '2' key (keycode 50) for page up, and the '8' key (keycode 56) for page down, leaving the four-way pad to browse links:
HKLM\Software\Microsoft\Internet Explorer\KeyMaps\50 = 1 (DWORD decimal)
HKLM\Software\Microsoft\Internet Explorer\KeyMaps\56 = 2 (DWORD decimal)
_____
Disable charging over USB
If your device can charge over USB, you can probably disable this feature by setting:
HKLM\Drivers\BuiltIn\usbfndrv\EnableUsbCharging = 0 (DWORD decimal)
And to re-enable:
HKLM\Drivers\BuiltIn\usbfndrv\EnableUsbCharging = 1 (DWORD decimal)
_____
Show Calendar event text in Week View
If you wish to see a Calendar event's text in the Week View, set the following:
HKCU\Software\Microsoft\Calendar\ShowTextInWeekView = 1 (DWORD decimal)
To disable it again:
HKCU\Software\Microsoft\Calendar\ShowTextInWeekView = 0 (DWORD decimal)
Please note that your event must have long enough a duration to show the event text, and the week view (with its narrow columns) truncates long words easily
Also note that the key "Calendar" may not exist - just create it if it doesn't
_____
Change Calendar 'working days'
If you wish to change the 'working days' in the calendar, adjust the following:
For a Mon-Fri workweek (default):
HKLM\Software\Microsoft\Calendar\ActiveTimes\ActiveTimes = 2210003E (DWORD hexadecimal)
For a Mon-Sat workweek:
HKLM\Software\Microsoft\Calendar\ActiveTimes\ActiveTimes = 2210007E (DWORD hexadecimal)
For a Tue-Thu workweek:
HKLM\Software\Microsoft\Calendar\ActiveTimes\ActiveTimes = 22100016 (DWORD hexadecimal)

Here's how this works. When editing the value, switch to "Binary" mode. For the default Mon-Fri, you should see:
100010000100000000000000111110
The last 7 numbers are what we're interested in. They stand for the days of the week, in reverse order: Saturday, Friday, Thursday, Wednesday, Tuesday, Monday, Sunday. When the number is "1", it is a working day. If it is "0", it's not a working day. So to look at the above examples again:
Days : SFTWTMS
Mon-Fri: 0111110
Mon-Sat: 1111110
Tue-Thu: 0011100
Using the above, you should be able to set the working days to whatever you'd like.
Note that this value also adjusts the working HOURS. The examples here all use the default 8am-5pm workday. See the "Change Calendar 'working hours'" tweak to modify this.
Note that the ActiveTimes key and value may not exist. Simply create them first.
_____
Change Calendar 'working hours'
If you wish to change the 'working hours' in the calendar, adjust the following:
For 8am-5pm (default):
HKLM\Software\Microsoft\Calendar\ActiveTimes\ActiveTimes = 2210003E (DWORD hexadecimal)
For 9am-5pm:
HKLM\Software\Microsoft\Calendar\ActiveTimes\ActiveTimes = 2212003E (DWORD hexadecimal)
For 2pm-10pm:
HKLM\Software\Microsoft\Calendar\ActiveTimes\ActiveTimes = 2C1C003E (DWORD hexadecimal)

Here's how this works.
The first 2 characters define the ending hour as a count of half hours since midnight, in hexadecimal. So for midnight, it would be 0 half hours in hexadecimal = 0. 5pm is 17 hours, or 34 half hours. 34 in hexadecimal is 22. 10pm is 22 hours, or 44 half hours. 44 in hexadecimal is 2C. You can use a calculator capable of hexadecimal conversions to get the hexadecimal number.
Similarly, the next 2 characters define the starting hour as a count of half hours since midnight, in hexadecimal. So for 8am.. 16 half hours, 16 in hexadecimal is 10. 9am = 18 half hours = 12. 14h = 28hh = 1C.
Using the above, you should be able to se the working hours to whatever you'd line.
Note that this value also adjusts the working DAYS. The examples here all use the default Mon-Fri workweek. See the "Change Calendar 'working days'" tweak to modify this.
Note that the ActiveTimes key and value may not exist. Simply create them first.
Note that you cannot set the End time earlier than the Start time, for obvious reasons
Note that you cannot set a Midnight end time. The best you can do is 11.30pm (2F)
Show 'busy status' in Calendar Agenda View
To show the "Free"/"Tentative"/"Out of office" states in the Agenda View, set:
HKLM\Software\Microsoft\Calendar\ShowBusyInDescription = 1 (DWORD decimal)
To hide it again:
HKLM\Software\Microsoft\Calendar\ShowBusyInDescription = 0 (DWORD decimal)
Note that this only appears to affect the 'Agenda' view. No other views, and not the Today Screen item.
_____
Make WM5 ask where to install a program (1)
If you wish to be able to specify whether to install a program on WM5's Main storage, or your Storage Card, regardless of installer setting set:
HKLM\Software\apps\Microsoft Application Installer\fAskDest = 1 (DWORD decimal)
To disable again:
HKLM\Software\apps\Microsoft Application Installer\fAskDest = 0 (DWORD decimal)
Please note that many applications do not support being installed on the Storage Card and may behave unpredictably, including crashing
_____
Make WM5 ask where to install a program (2)
An alternative method of making WM5 ask where to install a program is by adding the "/askdest" option to the Windows CE loader:
HKCR\cabfile\Shell\open\command = 'wceload.exe "%1" /askdest' (REG_SZ string, no quotes)
_____
Make WM5 keep CAB files around after installing (1)
If you wish to keep the original .CAB file around after installing the application, set:
HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 0 (DWORD decimal)
Or to restore to the default:
HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 2 (DWORD decimal)
_____
Make WM5 keep CAB files around after installing (2)
An alternative method of making WM5 keep the original .CAB file around after installing the application is by adding the "/nodelete" option to the Windows CE loader:
HKCR\cabfile\Shell\open\command = 'wceload.exe "%1" /nodelete' (REG_SZ string, no quotes)
_____
Make WM5 prompt before overwriting an existing installation
If you wish to make WM5 prompt you before overwriting an existing installation, set:
HKLM\Software\apps\Microsoft Application Installer\fAskOptions = 1 (DWORD decimal)
To disable again:
HKLM\Software\apps\Microsoft Application Installer\fAskOptions = 0 (DWORD decimal)
_____
Show Tomorrow's Appointments on Calendar Today item
If you wish to see tomorrow's Appointments on the Calendar Today item, set:
If you wish to see today's All Day event as well:
HKLM\Software\Microsoft\Today\Items\Calendar\Flags = 5 (DWORD decimal)
If you do not wish to see today's All Day event:
HKLM\Software\Microsoft\Today\Items\Calendar\Flags = 4 (DWORD decimal)

Other values (attainable through the "Options..." dialog for the Calendar Today item just as well):
0 = Show Upcoming Appointments
1 = Show Upcoming Appointments and today's "All Day" event
2 = Show Next Appointment
3 = Show Next Appointment and today's "All Day" event
It works out to the following binary structure:
Default Behavior: Show Upcoming Appointments
000
||'- Show "All Day" events (doesn't show tomorrow's "All Day" events)
|'- Show Next Appointment
'- Show Tomorrow's Appointments
_____
Show Wireless Today item
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status, WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM\Software\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
_____
Low Battery warning
By default, a PPC will sound a warning sound when the battery is running low (10%, fixed value), but there's no way to disable or change the notification. To enable this, so that it is visible in the "Sounds & Notifications" control panel, set:
HKCU\ControlPanel\Notifications\{A877D663-239C-47a7-9304-0D347F580408}\Default = "Low battery warning" (REG_SZ string, no quotes)
Note that the string used can be whatever you like it to be
_____
Enable Realtime Memory Defragmenting (or something.)
There isn't any concise description of this tweak, but it appears to free up some memory if nothing else.
HKCU\Software\Microsoft\Shell\NeverDorkMemory
Note that you should only create the key; this is not a value!

[Kira_Ryuck]

Quando ne provi qualcuno commentalo e dicci dettagliatamente cosa fà.. così viene un bel post ;)

[MassiMax]

GRANDIOSO!!!! Mi metto subito a smanettare con Resco Registry Editor! :D Col vecchio Qtek S200 avevo ottenuto risultati molto interessanti, ma non trovavo più le stringhe che avevo usato al tempo... Grazie mille!

[Kira_Ryuck]

di nulla mi raccomando facci sapere !!

[folly]

funziona anche per il tytn II???